The Crawler bot: a 3D printed robot that rolls
The Crawler bot is a 3D printed robot that rolls low and long, with a printed track cover on each side, with a 2 inch touch screen for a face, a camera and a speaker. It is 104 x 100 x 107 mm and weighs 216.2 g with its parts (140.9 g of that is printed plastic). Built and tested by 3D3D it costs from $300.16 CAD; the bought parts for building it yourself come to $141.39 CAD.
- 104 x 100 x 107 mmwidth x depth x height
- 216.2 gwith its parts
- 140.9 gprinted, 14 pieces
- from $300.16built and tested by 3D3D
What it is
The Mini's two wheel drives under a long, low body with a printed track cover on each side. The covers are for looks: it still rolls on its two wheels, and it stays low and steady. Its head is the Gem head. The Mini v2's shield: wide across the cheeks, a narrow chin.
Its face, voice and moves run in the test room today. The program that runs them on the real ESP32-S3 chip is not built yet.
This is the Crawler body with the Gem head. All 8 heads fit this body, and every pair is checked.
Three ways to get it
Built by 3D3D: from $300.16
3D3D buys the parts (at cost plus 15%), prints the pieces (by the gram), builds it and tests it. Build $50.00 and test $50.00, finishing at $25.00 an hour, only when a piece needs it. Shipping is on the invoice.
Printed kit: $80.72
The printed pieces, 140.9 g in all (PETG $0.11 a gram, TPU 95A $0.18 a gram, $5.00 setup, bed time per plate), with the parts list. You build it.
Build it yourself: free files
Print files for every piece, the parts list with links, the wiring and your design file. The bought parts come to $141.39 in whole packs.
You pay by Interac e-Transfer on an invoice the 3D3D team emails after it checks your design; there is no card checkout, and nothing is charged until you pay that invoice. Shipping is worked out from where it goes and added to the invoice.
Finishing is $0.00 on this bot: no piece needs supports taken off and it has no kit pieces to glue on.
What you buy for it
| Part | Used | Pack price (CAD) | Your cost, whole packs | 3D3D's price, parts + 15% |
|---|---|---|---|---|
| FS90R continuous servo, 2-pack with wheels (DIYmalls) Wheel drive (FS90R). amazon.ca, seen 2026-11-02. Listing | 2 | $19.97 for 2 | $19.97 | $22.97 |
| PTFE glass-cloth tape 10 mm x 10 m (the pad on the glide's dome), sold by the roll Glide. amazon.ca, seen 2026-11-02. Listing | 2 | $9.98 for 1 | $9.98 | $11.48 |
| M3 x 4 self-tapping screw Glide. amazon.ca, seen 2026-11-04. Listing | 2 | $16.99 for 50 | $16.99 | $0.78 |
| M3 x 8 pan-head screw M3 screw hole with head recess, M3 screw column (base to lid). amazon.ca, seen 2026-11-04. Listing | 6 | $16.98 for 20 | $16.98 | $5.85 |
| Waveshare 2" capacitive touch LCD (18-pin FPC option) 2" touch screen. amazon.ca, seen 2026-11-02. Listing | 1 | $29.99 for 1 | $29.99 | $34.49 |
| Waveshare ESP32-S3-CAM-OV5640 board (camera and 2 W speaker in the box) Camera brain board. amazon.ca, seen 2026-11-02. Listing | 1 | $37.99 for 1 | $37.99 | $43.69 |
| M3 brass heat-set inserts, 120 pieces M3 heat-set insert boss. amazon.ca, seen 2026-11-02. Listing | 2 | $9.49 for 120 | $9.49 | $0.18 |
Pack prices are what amazon.ca listed on the date shown and change daily.
What is printed
| Part | Material | Colour | Grams |
|---|---|---|---|
| Wheel hub (right) | PETG | graphite | 2.3 |
| Tyre (right) | TPU 95A | tpu | 1.5 |
| Wheel hub (left) | PETG | graphite | 2.3 |
| Tyre (left) | TPU 95A | tpu | 1.5 |
| Glide (front) | PETG + PTFE tape | graphite | 0.3 |
| Glide (back) | PETG + PTFE tape | graphite | 0.3 |
| Base chassis | PETG | graphite | 60.6 |
| Base light seam | PETG clear | glow | 2.2 |
| Base lid | PETG | bone | 26.1 |
| Visor (screen) | PETG clear smoked | smoke | 3.5 |
| Camera lens ring (camera) | PETG clear | glow | 0.3 |
| Face bezel | PETG | teal | 9.3 |
| Head light seam | PETG clear | glow | 1 |
| Head shell | PETG | bone | 29.6 |
Grams are the print gate's own figures for each piece (0.9 mm skin and 15% infill). Printing costs $0.11 a gram in PETG and $0.18 a gram in TPU 95A, plus $5.00 setup and bed time for each plate (one plate for each colour).
Change the head
Any of the 8 heads goes on this body. The built price moves by −$9.95 to +$0.89 against the Gem head.
| Head | Look | Built by 3D3D (from) | Against the Gem head |
|---|---|---|---|
| Gem head | A shield, narrow chin | $300.16 | Same price |
| Mini head | Friendly and rounded | $290.21 | −$9.95 |
| Dome head | Round face, half-ball back | $300.37 | +$0.21 |
| Visor head | A wide band, camera at the side | $300.31 | +$0.15 |
| Cyclops head | One big eye | $300.96 | +$0.80 |
| Twin-lens head | Two lens rings (one camera) | $300.93 | +$0.77 |
| Antenna head | Bubble head, two antennae | $300.52 | +$0.36 |
| Pod head | A capsule on a stem | $301.05 | +$0.89 |
Other bots
- The Mini v2: from $362.89
- The small-wheel bot: from $295.73
- The Desk bot: from $315.14
- The Tower bot: from $324.42
- The first Mini: from $285.38
New to this? Read how to control a robot from your phone, or the questions people ask.
All prices are in Canadian dollars before tax and shipping. Bought parts are priced from amazon.ca listings (seen 2026-11-04), plus 15% when 3D3D buys them. Printing, the build and test fee and finishing are 3D3D's own rates, listed on the prices page.